Motorola moto watch ultra

Learn how to set up, use, and connect your Motorola moto watch ultra to the Metro by T-Mobile network.

To get started:

  • To get started, charge the battery before using your Watch for the first time or when it has been unused for extended periods.
  • Assemble the watch by attaching the band to your watch while pressing the band’s button firmly.
  • Turn on your new watch and wait for the load screen "Get started in the Moto Watch app on your phone.
  • Open the Moto Watch app on your smartphone. If the app is not on your smartphone, download it from the Play Store.

First-time use

1. First time use  

Watch band

Attach the band

  1. Insert one end of the spring bar into the watch lug.
  2. Slide and hold the quick release pin toward the center.
  3. Push the band in, then release the pin to lock it.

Remove the band

  1. Slide the pin toward the center to unlock.
  2. Next, angle the band away from the watch.

Charge device

Use the magnetic charging pad included in the box to charge your watch.

  1. Align the charging pad’s pins with the charging contacts on your watch back.
  2. Place the watch, facing upward, on the charging pad.Ensure that the charging pins and contacts are fully aligned.
  3. To charge your watch with a flat charging pad, plug in the USB-C end to a wall charger (purchased separately).
  4. Connect the charging pad cable to a USB-C power supply. 
  5. You can view charging status on the watch screen.
  6. After fully charged, disconnect your watch from the charging pad.

3. Set Up Your moto watch ultra

  • Turn on your watch. Press and hold the top button on the right side for a few seconds.
  • Get the Moto Watch app on your phone. If you don’t already have it, download it here:
  • Open the Moto Watch app and tap Pair a watch.
  • Tap your watch when it shows up on the screen.
  • Check the codes. Make sure the code on your phone matches the code on your watch, then tap Pair.
  • Follow the steps on your phone and watch screens to finish.
  • Next, activate your cellular plan with the steps in the previous section.

Activate your Metro by T-Mobile Cellular plan?

Just bought your Motorola moto watch ultra and haven’t turned on cellular service yet? Follow the steps below for how you bought your watch.

Bought it at a Metro by T-Mobile store

  1. Open the Moto Watch app on your phone.
  2. Tap Watch Settings, then Mobile Network, then Add eSIM.
  3. Wait while the eSIM downloads to your watch.
  4. When it finishes, your watch is connected.

Bought it online, through myAccount, or with help from Customer Care

  1. Check your email and follow the steps to finish activation.
  2. Turn on your watch and finish setting it up with your phone.
  3. Open the Moto Watch app on your phone.
  4. Tap Watch Settings, then Mobile Network, then Add eSIM.
  5. Wait while the eSIM downloads to your watch.
  6. When it finishes, your watch is connected.

Already have a watch from somewhere else?

Contact Customer Care and ask them to add a Wearable line for your moto watch ultra. Once the line is added, follow the steps above to download the eSIM.

Need more help?

Visit our Metro by T-Mobile Support site and fix the most common issues, right from your device! If you still have questions, contact us.

   Survey Link